Plic Care Water Warmer and Cover 750 ml

Remove dust from the top of the hot-water bottle if necessary and unscrew the cap.
Hold the hot-water bottle upright by the neck and slowly fill it up to 2/3 full with non-boiling water.
Screw on the cap, tightening it to prevent water leakage.
Expel any residual air.

use this product only for its intended purpose as described below:

For external use only.
Keep away from sources of heat. Do not expose to sunlight.
Never use product if damaged (plug, water leakage).
Hot water bottles are not suitable for children under 36 months of age, as there is a risk of burns.
Keep this product out of the reach of children and pets.
Always check heat and feel before applying the hot water bottle to the body.
Avoid prolonged direct contact with the skin, and check the temperature regularly.

Do not place in microwave or conventional oven.
Do not pierce the hot water bottle. Do not exert strong pressure on it when using it.
Do not use boiling water (max. 49°C), and use only tap water to fill it, as this may damage or break it.
Water that is too hot can cause injury and damage to the hot water bottle.
Do not fill the hot water bottle completely, as it could burst.
Never use the hot water bottle directly on the skin. Always use the cover, a cloth or a blanket to prevent burns.
Do not allow the hot water bottle to come into contact with oil or grease.

Wipe the hot water bottle with a damp cloth or sponge.
All covers are machine-washable.
Do not bleach. They can be dried at low temperature.
Completely empty the hot water bottle before storing, then screw on the cap.
Store in a clean, dry place, away from light.